The RollEase Automate Motor Adapter 25/28/35mm to R-Series 3Nm MTAD-252835-RS is for adapting RollEase Automate DC motors to R-Series bracket systems. The adapter is compatible with RB360, RB380, and RB390 brackets.
3Nm Max
Additional information
Weight
1 oz
Dimensions
2 × 2 × 1 in
Specifications
Max Load
3 Nm
Compatible Products
Automate Motors
SKU
RollEase Automate Li-ion 1.1 Motor
MTDCBRF25-1.1
RollEase Automate Li-ion Q2.0 Motor
MTDCBRFQ28-2
RollEase Automate Li-ion 3.0 Motor
MTDCBRF35-3
Brackets
SKU
RollEase R-Series RB360 Bracket
RB360
RollEase R-Series RB380 Bracket
RB380
RollEase R-Series RB390 Bracket
RB390
The RollEase 25mm motors are natively compatible with the R3/R8 series brackets. This adapter is not required and would only be used to reinforce the motor head.
The RollEase 28mm motors are natively compatible with the R3/R8 series brackets. The adapter is required to receive the full warranty due to the 2Nm lifting capacity of these motors.
The RollEase 35mm motors are not natively compatible with any brackets and this adapter is required for compatibility with the R3/R8 series brackets. The 35mm DC motors have a 3Nm and the 35mm AC motors have a 6Nm lifting capacity. This bracket adapter is rated for 3Nm. Use of this adapter plate will reduce the lifting capacity of the 6Nm (53lb) motors to 3Nm (26lb). The MTAD-252835-SL is recommended by RollEase if you need the lifting capacity of 6Nm.
You may also like…
RollEase R-Series RB360 Bracket for R3 & R8 Clutch (Set)
